ACEBRI Mower Blades 50 inch for Toro for Exmark Quest 110-6837-03,112-9759-03,115-5059-03, for Toro 50 inch Time Cutter SS5000 MX5060 Z5000 MX5050 Z5035 75750 MX5000 75755 75759, 3Pack

What It Is

This is a 3-pack of aftermarket 50-inch mower blades designed for Toro Time Cutter SS5000, MX5050, Z5000, Z5035, and Z5035 mowers, as well as Exmark Quest models. They replace OEM part numbers 110-6837-03, 112-9759-03, and 115-5059-03, intended for cutting grass on residential or commercial turf.

Fitment & Compatibility

Before buying, confirm your mower’s deck size is exactly 50 inches (not 42, 48, or 54). These blades fit Toro Time Cutter SS5000 (models 75750, 75755, 75759), MX5000, MX5050, Z5000, Z5035, and Exmark Quest with 50-inch decks. Measure your existing blade length (likely 16.5 inches) and center hole diameter (usually 1 inch). Check the blade thickness (typically 0.204 inches) and ensure the offset matches your deck’s design (these are standard lift, not high-lift or mulching). Verify OEM numbers on your old blades: 110-6837-03, 112-9759-03, or 115-5059-03. If your mower uses a different blade pattern (e.g., oval hole or star pattern), these won’t fit. Aftermarket blades may have slight thickness or balance variations compared to OEM.

Key Things to Know

• Quality vs. OEM: At $31.99 for a 3-pack, these are budget-friendly but may not hold an edge as long as genuine Toro blades. Check reviews for durability reports.
• Installation: Simple DIY job—jack up mower safely, remove old blades, install new ones with the lift edge facing up. Torque to 40-50 ft-lbs. Use a blade balancer to avoid vibration.
• Common Gotcha: These are standard lift blades, not for mulching or bagging. If you need a different cutting action, look for high-lift or gator-style blades.
• Fitment Check: Always measure your deck and old blades before ordering. Some Time Cutter models use different blade lengths (e.g., 54-inch decks need longer blades).

Should You Buy It

If you have a compatible Toro or Exmark 50-inch mower and want an affordable replacement for basic cutting, this 3-pack is a good value. But if you need precise OEM performance for commercial use or specific cutting (e.g., mulching), stick with genuine Toro blades.