954-05040 954-0241A Drive Belt Replace Craftsman, MTD, Murray, Huskee Riding Mower Drive Belt Compatible Troy Bilt Pony 754-05040, 754-0241A, 954-0421 Drive Belt （5/8'' x 35-1/4''）

What It Is

This is a replacement drive belt (5/8’’ x 35-1/4’') for riding lawn mowers from Craftsman, MTD, Murray, Huskee, and Troy-Bilt Pony models. It transfers engine power to the transmission, enabling forward/reverse movement—not the mower deck blades.

Fitment & Compatibility

Before buying, check these three things:

• Measure your old belt: Confirm it’s 5/8’’ wide and 35-1/4’’ long (outside circumference). A 1/4’’ difference can cause slipping or failure.
• Verify OEM part numbers: This belt replaces OEM #954-05040, 954-0241A, 754-05040, 754-0241A, and 954-0421. Cross-reference your mower’s manual or existing belt stamp.
• Check deck size & model: Fits most 42’’ and 46’’ deck Craftsman/MTD/Murray/Huskee riders from the 2000s–2010s, plus Troy-Bilt Pony. Not compatible with zero-turn or older (pre-1990) models. Search your model number (e.g., 917.xxxxx) on the manufacturer’s site for confirmation.

This is an aftermarket part, not OEM. Quality is generally good, but belt life may be shorter than OEM on heavy-use machines.

Key Things to Know

• Quality: Made from standard rubber/cord. Good for residential use; may wear faster under frequent heavy mowing or hills.
• Installation difficulty: Moderate. You’ll need to remove the mower deck and possibly the belt guard. Allow 30–60 minutes.
• Common gotchas: The belt routing is specific—take a photo before removing the old one. If your mower has a spring-loaded idler pulley, release tension carefully to avoid pinching.
• Warranty: Typically 30–90 days from seller; verify before purchase.

Should You Buy It

This is a solid budget pick for light-to-medium residential use on common Craftsman/MTD/Murray riders. If you mow several acres weekly or need maximum durability, consider an OEM belt instead. For occasional mowing and easy replacement, this delivers good value at $12.99.