954-04060C Mower Drive Belt (1/2" x 96.5") for Troy Bilt 42" Riding Mower, Fits MTD Craftsman Cub Cadet John Deere Lawn Tractors, Replaces 954-04060 954-04060B 754-04060 754-04060B

What It Is

This is a replacement drive belt for 42-inch cutting deck riding mowers. It transfers power from the engine pulley to the deck spindles, making the blades spin. Designed for Troy-Bilt, MTD, Craftsman, Cub Cadet, and John Deere lawn tractors with a 42-inch deck.

Fitment & Compatibility

Before buying, confirm three things:

• Deck size: Only for 42-inch decks. Measure your deck if unsure.
• Belt dimensions: 1/2 inch wide, 96.5 inches long. Check your old belt’s part number or measure it (flat, not stretched).
• OEM cross-reference: Replaces 954-04060, 954-04060B, 754-04060, 754-04060B. If your mower uses one of these, it fits.
• Brand fit: Works with most Troy-Bilt, MTD, Craftsman, Cub Cadet, and John Deere 42-inch deck tractors from the 2000s onward. Verify your model number in the owner’s manual or on the deck.

Key Things to Know

• Quality: Aftermarket belt, not OEM. Fine for residential use, but may not last as long as a genuine Cub Cadet or John Deere belt under heavy use.
• Installation difficulty: Moderate. You’ll need to remove the deck or access the belt routing. Have a diagram or take a photo before removing the old belt.
• Common gotcha: The belt must be routed correctly around all pulleys and tensioners. If it slips or squeals, recheck routing and tension.
• Price vs. value: At $14.88, it’s a budget-friendly option. OEM belts often cost $20–30. If you mow a small lawn occasionally, this is fine.

Should You Buy It

Yes, if you need a reliable, low-cost replacement for a 42-inch deck mower and your mower’s original belt is worn or broken. It’s a good value for light to moderate use. For heavy commercial use or if you want maximum longevity, consider spending more on an OEM belt.