954-04060C Deck Belt for Troy Bilt Pony 42 Inch Mower 954-04060B 954-04060 754-04060B Cub Cadet LTX1040 LTX1042 Craftsman T110 T1000 T1200 T1400 MTD Gold 42" Riding Mower Parts (1/2" x 96.5")

What It Is

This is a replacement deck belt for 42-inch riding mowers, specifically designed to transfer power from the engine pulley to the mower deck blades. It’s a direct fit for Troy-Bilt Pony, Cub Cadet LTX1040/LTX1042, Craftsman T110/T1000/T1200/T1400, and MTD Gold 42-inch mowers.

Fitment & Compatibility

Before buying, confirm these three things:

• Deck size: Must be exactly 42 inches. Measure your deck width if unsure.
• Belt dimensions: 1/2 inch wide, 96.5 inches long. Measure your old belt’s length (lay it flat, measure end-to-end) and width with a caliper.
• OEM part numbers: This belt replaces OEM numbers 954-04060C, 954-04060B, 954-04060, and 754-04060B. If your mower’s manual lists one of these, it’s a match. Also works for many Craftsman, Cub Cadet, and MTD models with 42-inch decks—check your model number against the seller’s compatibility list.

This is an aftermarket belt, not OEM. It’s built to OEM specs, but if you want exact factory fit, buy the genuine Cub Cadet or MTD part.

Key Things to Know

• Quality: Made from Kevlar-reinforced rubber, which resists stretching and heat better than standard belts. Expect 2-3 seasons with normal residential use.
• Installation difficulty: Moderate. You’ll need to remove the mower deck or at least the belt guards. A belt routing diagram is usually printed under the deck or in your manual—snap a photo before removing the old belt.
• Common gotcha: If your old belt is frayed or cracked, check pulleys and spindles for wear or debris. A damaged pulley will kill a new belt fast.
• Tension check: After installing, the belt should have about 1/2 inch of deflection when pressed midway between pulleys. Too tight wears bearings; too loose slips.

Should You Buy It

Buy this if you need a reliable, affordable replacement for a 42-inch deck belt on a Troy-Bilt, Cub Cadet, Craftsman, or MTD rider and don’t mind an aftermarket part. It’s a solid value at $14 for residential use. Skip it if you need an OEM belt for commercial duty or if your mower’s deck is not exactly 42 inches.