951-10299A Recoil Starter Pull Start Replace for MTD Troy Bilt 751-10299 1P61P0 Cub Cadet Recoil

What It Is

This is a replacement recoil starter assembly for push mowers with certain Briggs & Stratton, MTD, Troy-Bilt, and Cub Cadet engines. It mounts on top of the engine, pulls to spin the flywheel and start the mower.

Fitment & Compatibility

• OEM cross-reference: Replaces MTD 751-10299, Cub Cadet 951-10299A, and fits Briggs & Stratton engine models 1P61P0, 1P65P0, 1P70P0 (common on many push mowers).
• Measure your bolt pattern: Center-to-center distance between mounting holes should be about 2.5 inches (63.5mm). Also check the rope hole alignment on the blower housing—some older decks require a different angle.
• Check your engine model number: It’s stamped on the engine shroud (e.g., 1P61P0). Do not rely on the mower brand alone—many MTD/Troy-Bilt mowers use non-compatible starters.
• Aftermarket part: Not OEM. Works as a replacement, but verify the rope length (typically 48-54 inches) matches your original. If the rope is too short, you may need to re-spool it.

Key Things to Know

• Installation difficulty: Easy—requires only a screwdriver or socket. Remove the old starter, align the new one, and bolt it on. No special tools needed.
• Common gotcha: The starter pawls (the little plastic hooks that grab the flywheel) can be fragile. Don’t force the rope if it feels stuck; check that the pawls are seated correctly.
• Quality note: Budget-friendly, but the plastic housing is less durable than OEM. It’s fine for light residential use but may crack if you pull aggressively or leave the mower in direct sun.
• Rope replacement: If your old starter has a broken rope but the housing and spring are fine, you can just replace the rope. This assembly includes the whole unit, so it’s a faster fix.

Should You Buy It

Buy this if you have a common MTD/Troy-Bilt/Cub Cadet push mower with a Briggs 1P61P0 or similar engine and need a quick, cheap fix for a broken pull start. It’s not for heavy-duty or commercial use, but for a $14 part that installs in 10 minutes, it’s a solid value for homeowners. Double-check your engine model and bolt pattern before ordering.