95-605 Mulch Blades 95-605-3 Gator G3 Blades Compatible with 54" Deck H usqvarna Z254F YTH24V54, A YP C raftsman A riens 54 inch Mower Blade, Replaces 112053 187254, 532187255, 582760502, 3 Pack

What It Is

This is a 3-pack of aftermarket Gator G3 mulching blades (model 95-605) designed for 54-inch cutting decks on Husqvarna, Craftsman, and Ariens lawn tractors. The G3’s multi-level cutting surface chops clippings finer than standard blades, making it ideal for mulching leaves and grass without bagging.

Fitment & Compatibility

Before buying, verify three things:

• Deck size: Only for 54-inch decks. Measure deck width (not mower model) to confirm.
• Blade dimensions: Each blade is 20.5 inches long, with a 1-inch center hole and 0.25-inch thick. Measure your existing blade length and hole size.
• Model cross-reference: Replaces OEM part numbers 112053, 187254, 532187255, 582760502. Fits Husqvarna Z254F, YTH24V54, and select Craftsman/Ariens 54-inch models. Check your mower’s model number against the seller’s compatibility list—some older decks may vary.
• Aftermarket note: These are not OEM, but match OEM specs for direct bolt-on. No additional adapters or spacers needed.

Key Things to Know

• Installation difficulty: Easy. Jack up mower or tilt deck, remove center bolt and blade, replace with new blade (sharp side down). Torque bolt to 70–90 ft-lbs.
• Mulching performance: The G3’s serrated edges and curved fins lift clippings for finer chopping. Works best with dry grass—wet clumps may still require a second pass.
• Durability: Heat-treated steel resists bending on rocks or roots, but impact with hard objects can chip the edge. Inspect after each season.
• Common gotcha: These blades are slightly heavier than OEM, which may reduce engine RPM slightly on smaller tractors (under 20 HP). Not a safety issue, but you may notice slower blade spin.

Should You Buy It

Buy this if you have a 54-inch Husqvarna, Craftsman, or Ariens tractor and want a budget-friendly mulching upgrade that clippings finer than stock blades. Skip if you need OEM exactness or have a smaller deck (under 50 inches) or a mower under 18 HP—stick with lighter standard blades.