946-05106B Control Cable Replacement for Cub Cadet MTD Craftsman SC300,SC300 Hw,SC500,SC500EZ,69" Total Length Throttle Cable Fits Most Push Mower

What It Is

The 946-05106B is a 69-inch total length throttle control cable designed for Cub Cadet, MTD, and Craftsman push mowers. It replaces the original cable that connects the throttle lever to the engine carburetor or governor, enabling speed and choke adjustments.

Fitment & Compatibility

Check these before buying:

• Model numbers: Fits SC300, SC300 HW, SC500, SC500EZ, and many other MTD/Craftsman push mowers with similar cable routing. Verify your mower’s model plate (under the rear flap or near the handle) matches any of these or a cross-reference list.
• Total length: 69 inches from end to end (including outer casing). Measure your old cable’s overall length; if yours is shorter or longer, this won’t fit without rerouting.
• End fittings: Both ends have standard barrel-style connectors. The engine end attaches to the carburetor bracket; the handle end clips into the throttle lever. If your mower uses a different connector (e.g., threaded or loop), this won’t work.
• OEM vs aftermarket: This is an OEM replacement from Cub Cadet/MTD, so it matches factory specs. Aftermarket cables may have different end fittings or length tolerances.

Key Things to Know

• Installation difficulty: Moderate. You’ll need to remove the old cable from the handle and engine, route the new one along the same path, and adjust the cable tension at the carburetor. Basic tools (screwdriver, pliers) required.
• Common gotcha: The cable can kink if bent too sharply during routing. Avoid tight 90-degree bends. If it binds, the throttle won’t return to idle properly.
• Quality: 4.3/5 stars from 30 reviews. Most users report it fits well and works reliably. A few note the outer casing is slightly stiffer than OEM, which can make routing a bit harder.
• No included hardware: The cable comes bare; you’ll reuse the original clips, zip ties, or retainers from your old cable.

Should You Buy It

Buy this if your Cub Cadet, MTD, or Craftsman push mower’s throttle cable is frayed, stuck, or broken and you need a direct OEM replacement at a reasonable price. It’s a good fit for the listed models and similar MTD-built mowers, but measure your old cable and check end connectors first to avoid returns.