8TEN Spindle High Lift Blade Kit for Hustler 60 inch Deck ATZ Super Hustler Z Zero Turn Mower

What It Is

This is a set of three high-lift blades designed for 60-inch Hustler zero-turn mowers, specifically the ATZ, Super Hustler, and similar models. The high-lift profile increases airflow under the deck for superior bagging performance and better discharge in tall or wet grass.

Fitment & Compatibility

Before buying, confirm your deck is exactly 60 inches (measured blade tip to tip). This kit fits Hustler ATZ, Super Hustler Z, and many Hustler FasTrak models with a 60-inch fabricated deck. OEM replacements are typically Hustler part numbers 394005, 394006, 394007. Check your blade’s center hole diameter (should be 5/8-inch) and overall length (should be 20-1/2 inches). Measure your old blade’s thickness—this kit uses 0.203-inch thick blades. If your deck has a different spindle pattern or uses oval-center blades, this kit won’t work.

Key Things to Know

• Installation: Straightforward bolt-on with a 15/16-inch wrench. Torque spindle nuts to 70-80 ft-lbs. Use thread locker if bolts are loose.
• Quality: Mixed reviews—some users report blades arriving slightly out of balance or with uneven edges. Check balance before installing and file any rough burrs.
• High-lift tradeoff: These blades create more drag and require more engine power. You may notice slightly reduced run time per tank and a bit more noise compared to standard blades.
• Deck clearance: Ensure your deck’s blade spindles are in good condition. Worn spindles can cause vibration that amplifies any blade imbalance.

Should You Buy It

If you need a budget-friendly replacement for your Hustler 60-inch deck and primarily bag clippings or cut overgrown grass, this kit can work—but plan to spend 10 minutes balancing them before first use. For precision cutting or if you value long blade life, consider OEM blades instead.