8TEN Mower Spindle for Wright 48 52 61 72 inch Deck Stander ZK Sport X 714600007 71460126 71460136

What It Is

This 8TEN mower spindle is a direct-replacement spindle assembly for Wright Stander ZK and Sport series mowers with 48", 52", 61", or 72" decks. It drives the blade via the pulley and houses the bearings that let the blade spin freely.

Fitment & Compatibility

Before buying, confirm your deck size and model. This spindle replaces OEM part numbers 714600007, 71460126, and 71460136. It fits Wright Stander ZK and Sport models with the above deck sizes—but not all older or non-ZK Wright decks. Measure the spindle shaft diameter (typically 1" or 7/8") and bolt pattern (usually 4-bolt, 3.5" center-to-center). Also check pulley bore size; some Wright decks use a 20mm or 5/8" bore pulley. If your pulley is worn, consider replacing it at the same time.

Key Things to Know

• Quality vs OEM: 8TEN is an aftermarket brand. Users report decent durability for residential and light commercial use, but OEM spindles may last longer under heavy commercial cutting.
• Installation difficulty: Moderate. Requires removing the deck, belt, pulley, and blade. You’ll need a socket set, torque wrench (tighten spindle bolts to 35-45 ft-lbs), and possibly a puller for stuck pulleys.
• Common gotchas: The included bearings may need greasing before install—some are dry from the factory. Also, the spindle housing may not match the deck’s paint or finish, but this doesn’t affect function.
• Warranty: 8TEN typically offers a 1-year warranty; verify with the seller.

Should You Buy It

If you need a budget-friendly spindle for a Wright Stander ZK or Sport and your deck size matches, this is a solid option for occasional to moderate use. For daily commercial mowing, OEM spindles are more reliable long-term.