8TEN Mower Spindle for Wright 32 36 inch Deck Stander WM WMI 714600007 71460126 2 Pack

What It Is

This is an aftermarket replacement spindle assembly (2-pack) designed for Wright 32-inch and 36-inch stander mowers (WM/WMI series). It connects the mower deck’s blade to the drive belt, enabling blade rotation for cutting grass.

Fitment & Compatibility

• Deck size: Wright 32" and 36" stander decks only. Not for 48", 52", or 60" decks.
• Model numbers: Wright WM and WMI series (e.g., WM 32, WMI 36). Confirm your model uses the OEM part numbers 714600007 (left) and 71460126 (right).
• OEM vs aftermarket: This is a non-OEM replacement. The OEM part costs more but may offer better consistency. Check if your existing spindles use a 1" shaft (standard for these decks).
• Measurements before buying: Measure the spindle housing height (approx. 4.5") and bolt pattern (typically 3 bolts on a 3.25" circle). Verify the blade bolt size (usually 5/8"-18). If these don’t match, this spindle won’t fit.

Key Things to Know

• Low user rating (2.9/5): The 3 reviews indicate premature bearing failure or poor fitment. This is a high-risk purchase for a part that takes heavy vibration and debris.
• Installation difficulty: Moderate. Requires removing the deck, unbolting old spindles, and transferring pulleys. You’ll need a torque wrench (specs: ~40-50 ft-lbs for mounting bolts). Bearing press is not needed—these come pre-assembled.
• Common gotcha: The bearings may be unsealed or under-greased. Some users report failure within 10 hours. Inspect and grease immediately after install (use a lithium-compatible grease).
• Inconsistent sizing: The bolt hole alignment may vary from OEM. Test-fit before tightening all bolts. If holes don’t line up, return immediately.

Should You Buy It

Only if you’re on a tight budget and can accept the risk of early failure. For a Wright stander used commercially or in heavy residential cutting, spend extra on OEM spindles—they’re more reliable and will save downtime. This 2-pack is best for a backup or a light-use homeowner mower where you can afford to replace them again soon.