8TEN LawnRAZOR Sand Mower Blade Set for Kees Briggs Murray Ranch King 092003E701 92003E701MA 38 inch Deck(Low-Lift)

What It Is

This is a low-lift sand mower blade set designed for Murray, Briggs & Stratton, and Kees/Ranch King mowers with a 38-inch cutting deck. It’s ideal for sandy soil or fine grass where standard blades can cause excessive wear or clumping.

Fitment & Compatibility

• Deck size: Only for 38-inch decks. Measure from blade tip to tip across the deck—if it’s 38 inches, this set fits.
• Models: Direct replacement for OEM part numbers 092003E701, 92003E701MA, and similar Murray/Ranch King decks. Check your mower’s manual or old blade part number.
• Aftermarket vs OEM: This is an aftermarket set, not OEM. It matches the original dimensions (blade length, center hole size, and offset) but verify by comparing to your old blade.
• Measurements: Each blade is approximately 19 inches long, with a 7/8-inch center hole and 0.25-inch thickness. Confirm these match your existing blade before buying.

Key Things to Know

• Low-lift design: Reduces dust and clumping in sandy or dry conditions, but won’t lift grass as aggressively as a high-lift blade. Not ideal for thick, wet grass.
• Installation difficulty: Easy—requires a socket wrench and torque wrench (blade bolts typically need 35–45 ft-lbs). Use thread locker if bolts aren’t new.
• Balance check: Aftermarket blades sometimes need balancing before use. A cheap blade balancer ($10–15) saves vibration and spindle wear.
• Sharpness out of box: Usually sharp enough for one cut, but expect to sharpen after the first use for best results.

Should You Buy It

If you run a Murray, Briggs, or Ranch King mower on sandy soil or fine grass, this low-lift blade set is a practical, well-rated choice. It won’t win any awards for wet-grass performance, but for its intended use—reducing wear and dust—it’s a solid value at $35. Double-check your deck size and blade dimensions, and you’re set.