8TEN LawnRAZOR Mower Blade Set for Toro Z200 Groundmaster Z Master 44-6250 106-0629 108-1124 62 inch Deck (High Lift)

What It Is

This is a set of three high-lift mower blades designed specifically for Toro Z200, Groundmaster, and Z Master zero-turn mowers with a 62-inch deck. The high-lift profile increases airflow under the deck for superior grass lift and discharge, making it best for tall, thick, or wet grass where standard blades leave clumps.

Fitment & Compatibility

Before buying, confirm your mower has a 62-inch deck—this set will not work on 52-inch or 60-inch decks. Check your OEM blade part numbers: 44-6250, 106-0629, or 108-1124. These 8TEN blades are aftermarket replacements for those Toro originals. Measure your blade length (should be 20.5 inches), center hole diameter (1 inch), and thickness (0.2 inch). Verify your spindle count—this set is for three-blade decks only. Not compatible with Toro TimeCutter or Titan models.

Key Things to Know

• High-lift design improves bagging and side-discharge but increases engine load and wear on belts/spindles; avoid using in dry, dusty conditions or on fine Bermuda grass.
• Installation is straightforward if you have a torque wrench: tighten to 70–90 ft-lbs using a 15/16-inch socket. Use thread locker on bolts if supplied.
• Balance each blade before install—unbalanced blades cause vibration, poor cut, and spindle damage. A simple blade balancer costs under $10.
• Sharpen after 10–15 hours of use; these blades are made of hardened steel and can be resharpened 3–4 times before replacement.

Should You Buy It

If you own a Toro Z200, Groundmaster, or Z Master with a 62-inch deck and need a budget-friendly, high-performance blade for heavy grass or bagging, this set delivers. It’s not for light-duty mowing or fine turf—the high lift is aggressive. For the price ($43.95), it’s a solid aftermarket alternative to OEM blades, but verify your deck size and spindle count first.