8TEN LawnRAZOR Mower Blade Set for Toro TimeCutter 44 inch Deck 106-0630 54-0010 54-0010-03 55-4940 (Low-Lift)

What It Is

This is a set of three low-lift blades designed for the Toro TimeCutter zero-turn mower with a 44-inch cutting deck. They are meant for standard grass cutting, not mulching or bagging heavy loads.

Fitment & Compatibility

Before buying, confirm your deck is exactly 44 inches (not 42 or 50). These blades replace OEM part numbers 106-0630, 54-0010, 54-0010-03, and 55-4940. Measure your current blade length (should be approximately 16.5 inches) and center hole diameter (should be 5/8 inch). Also check the offset – these are low-lift, so if your mower uses high-lift or mulching blades, they won’t fit or perform correctly. The 8TEN set is a direct aftermarket replacement for Toro TimeCutter models with the 44-inch fabricated deck (years vary, so verify your specific model number).

Key Things to Buy

• Quality: 8TEN blades are made from heat-treated steel, but some users report they dull faster than OEM Toro blades. Expect to sharpen or replace them more often if you mow frequently or in tough conditions.
• Installation difficulty: Easy. Remove the old blade, note the orientation (cutting edge faces the direction of rotation), and torque to 70-85 ft-lbs. Use a blade removal tool or block of wood to prevent spinning.
• Common gotchas: These are low-lift – they won’t throw clippings as far or lift grass as well as high-lift blades in wet or tall grass. Also, the set includes three blades, but some decks use two different lengths; double-check all three are identical before installing.
• Balance: Out of the box, some blades may need balancing. Use a blade balancer tool to avoid vibration and bearing wear.

Should You Buy It

If you have a Toro TimeCutter with a 44-inch deck and need a budget-friendly replacement for standard cutting, this set works. It’s not for heavy mulching or wet grass, and you may need to sharpen more often than OEM. For casual homeowners mowing dry, short lawns, it’s a solid value. Avoid if you need high-lift performance or longer blade life.