8TEN LawnRAZOR Mower Blade Set for MTD Cub Cadet Enforcer Recon 02005017 942-04417 01005336 01005336P (High-Lift)

What It Is

This 8TEN LawnRAZOR high-lift blade set is designed to replace OEM blades on select MTD-built Cub Cadet, Enforcer, and Recon riding mowers. The high-lift design increases upward airflow for better grass clipping discharge and bagging performance, making it ideal for tall or wet grass.

Fitment & Compatibility

Before buying, confirm your mower deck size (typically 42–54 inches) and that your model uses three blades. Cross-reference your OEM part numbers: 02005017, 942-04417, 01005336, or 01005336P. This set fits many Cub Cadet LT, XT, and ZT series, plus Enforcer and Recon models—but verify your specific deck model and blade length (usually 16.5–20 inches). Measure your existing blade’s center hole diameter (commonly 5/8” or 7/8”) and thickness (often 0.25”). If your deck uses a different mount pattern or blade length, this set won’t work.

Key Things to Know

• Quality: 8TEN blades are heat-treated, hardened steel with a durable coating; they’re a solid mid-range alternative to OEM, but may not last as long in heavy use.
• Installation: Straightforward if you have a socket set and a torque wrench (tighten to 40–50 ft-lbs). Always lift the deck or remove the blades with the spark plug disconnected.
• Gotchas: High-lift blades increase stress on the spindle and engine—avoid using them on very low deck settings or in dry, dusty conditions, as they can throw debris. Also, balance the blades after installation to prevent vibration.
• No adapter included: Ensure your spindle uses a standard 5/8” or 7/8” hole; if it’s a different size, you’ll need a bushing.

Should You Buy It

If you need a cost-effective upgrade for better bagging on a compatible MTD/Cub Cadet mower and don’t mind slightly more frequent replacement, this set is a smart buy—especially given the high rating. Avoid it if you prioritize OEM longevity or have a non-standard blade mount.