8TEN LawnRAZOR Mower Blade for Toro Dixie Chopper 2550 2750 Magnum 50 inch Deck 30227-50 113579 (High Lift) 3 Pack

What It Is

This is a set of three high-lift replacement blades designed for 50-inch cutting decks on Toro Z-Master and Dixie Chopper commercial zero-turn mowers, optimized for superior grass discharge and bagging performance.

Fitment & Compatibility

Before buying, verify these three things:

• Deck size: Only fits 50-inch decks. Measure your deck width to confirm.
• Model compatibility: Direct fit for Toro Z-Master 2550, 2750, and Dixie Chopper Magnum 50-inch decks. Also compatible with OEM part numbers 30227-50 and 113579.
• Blade dimensions: Each blade is 16.5 inches long, 2.5 inches wide, with a 5-point star center hole and 0.5-inch thickness. Measure your current blade to confirm these match.
• OEM vs. aftermarket: This is an aftermarket blade; while it matches OEM specs, it may have slightly different balance or material composition than genuine Toro parts.

Key Things to Know

• High-lift design creates strong airflow for better clippings discharge and bagging, but increases engine load and wears faster than standard or mulching blades.
• Installation: Requires a torque wrench; tighten center bolt to 55-65 ft-lbs. Do not overtighten, as this can warp the blade or damage the spindle.
• Sharpening: Can be sharpened 2-3 times before replacement is recommended. Replace if bent, cracked, or if the cutting edge is worn more than 1/8 inch.
• Common gotcha: The 5-point star center hole is specific to Toro and Dixie Chopper—will not fit decks using a round or 7-point hole pattern.

Should You Buy It

If you own a Toro Z-Master 2550/2750 or Dixie Chopper Magnum with a 50-inch deck and prioritize clean cuts and efficient bagging over blade longevity, this three-pack offers good value at $29.95. Avoid it if you need mulching blades or have a different brand/model deck.