8TEN LawnRAZOR Mower Blade for Lesco Snapper Rear Engine Rider 28 inch Decks 1-9515 7019515 7019515BZYP (High-Lift)

What It Is

The 8TEN LawnRAZOR High-Lift blade is a replacement cutting blade designed for Snapper and Lesco rear-engine riders with 28-inch cutting decks. Its upward-curved design creates stronger airflow to lift grass for a cleaner cut, making it ideal for tall or thick lawns.

Fitment & Compatibility

Before buying, verify these three things:

• Deck size: Only fits 28-inch decks (not 26, 30, or 33-inch).
• Model number: Replaces OEM part numbers 1-9515, 7019515, and 7019515BZYP. Compatible with Snapper rear-engine riders (e.g., 2800 series) and Lesco commercial mowers using the same blade pattern.
• Measurements: Blade length is 28 inches, center hole diameter is 5/8 inch, and it uses a 1-inch offset (check your old blade’s offset—some Snapper decks require a different offset). Measure your existing blade’s length, hole size, and offset before ordering.

Key Things to Know

• Quality: 8TEN blades are made from hardened steel and are comparable to OEM in durability, but some users report slight balance variations out of the box. Check balance before installing.
• Installation: Easy swap with a socket wrench—remove the blade bolt, replace, and torque to 40-50 ft-lbs. Use a blade lock or block of wood to prevent spinning.
• Gotcha: High-lift blades increase mower vibration if the deck is not level or if the blade is unbalanced. They also require more engine power—if your mower bogs in thick grass, consider a standard-lift blade instead.
• Wear: Inspect for bending or dulling after 10-15 hours of use, especially on rocky or sandy soil.

Should You Buy It

This blade is a solid choice if you need a durable, high-lift replacement for a Snapper or Lesco 28-inch deck and your lawn is consistently tall or dense. It’s a cost-effective alternative to OEM, but if your mower struggles with power or you prefer a smoother, quieter ride, stick with a standard-lift blade.