8TEN LawnRAZOR Blade Set for Snapper Simplicity Broadmoor Regent 1737252 52" Deck (Notched High Lift) 3 Pack

What It Is

The 8TEN LawnRAZOR Blade Set is an aftermarket replacement blade pack for Snapper, Simplicity, Broadmoor, and Regent zero-turn riders with a 52-inch cutting deck. It uses a notched high-lift design to improve grass discharge and bagging performance.

Fitment & Compatibility

• Deck size: 52 inches; the three blades cover the full cutting width.
• OEM reference: Replaces Snapper/Simplicity part number 1737252.
• Measurements: Each blade is approximately 18.25 inches long, 2.5 inches wide, with a 1-inch center hole and 0.5-inch offset notch. Confirm your deck’s blade length and hole pattern before ordering.
• Compatible models: Snapper ZTR 52”, Simplicity Broadmoor 52”, Regent 52”, and similar chassis with notched spindle mounts. Check your mower’s manual or remove a current blade to verify the notch offset matches.
• Aftermarket note: Not OEM; may have slight differences in thickness or balance. Ensure your spindles accept the notch style.

Key Things to Know

• Installation: Moderate difficulty. Requires a blade removal tool, torque wrench (set to 70–90 ft-lbs), and blocking the deck safely. Torque is critical—under-tightening risks blade throw, over-tightening strips spindle bolts.
• Quality: High-carbon steel with hardened edge; holds up well on residential turf but may dull faster than OEM in sandy or rocky conditions. Balance-check each blade before mounting.
• Common gotcha: The notch must align with the spindle’s drive pin. Forcing a non-matching notch can damage the spindle or cause vibration. Measure your existing blade’s notch depth and offset.
• Pack contents: Three identical blades; no extra hardware (bolts/washers). Reuse originals or buy new if worn.

Should You Buy It

If you own a Snapper/Simplicity 52-inch deck and want a cost-effective high-lift blade for better bagging and discharge, this set is a solid value at ~$50. Avoid it if your deck uses a different notch pattern or you need OEM balance for heavy commercial use.