8TEN LawnRAZOR Blade Set for Simplicity Snapper 2050 2550 50 Inch Deck 1708229 1726453 (High Lift) 3 Pack

What It Is

The 8TEN LawnRAZOR Blade Set is a three-pack of high-lift replacement blades designed for Simplicity and Snapper zero-turn mowers with a 50-inch cutting deck. The high-lift design improves grass clipping discharge and bagging performance, making it ideal for thick or tall grass.

Fitment & Compatibility

Before buying, verify your mower has a 50-inch deck and uses OEM blade part numbers 1708229 or 1726453. This set fits Simplicity 2050 and Snapper 2550 series zero-turn mowers, but also works on many other Simplicity/Snapper models with those OEM part numbers. Check your current blade’s length (should be about 20.5 inches), center hole diameter (typically 7/16-inch or 1/2-inch), and spindle pattern. Measure your existing blade to confirm it matches—don’t rely solely on model name. Not compatible with 42-inch or 48-inch decks.

Key Things to Know

• Quality vs OEM: 8TEN blades are hardened steel but may be slightly thinner than OEM Snapper blades. They cut well but may dull faster in sandy or rocky conditions.
• Installation difficulty: Moderate. Requires a socket wrench and torque wrench (recommended torque: 70-90 ft-lbs). Use thread locker on spindle bolts to prevent loosening.
• Balance check: Some users report minor imbalance out of the box. Always balance each blade before installing—a $10 balancer tool can prevent vibration and spindle damage.
• High-lift trade-off: Better discharge and bagging, but increases engine load and fuel consumption slightly. Not ideal for dry, dusty conditions where low-lift blades are preferred.

Should You Buy It

Buy this set if you need a budget-friendly, high-lift alternative to OEM blades for a 50-inch Simplicity/Snapper zero-turn, especially if you frequently bag or mulch thick grass. Skip it if you mow in sandy soil, require exact OEM thickness, or want to avoid balancing work—spring for OEM blades instead.