8TEN LawnRAZOR Blade for Snapper ZT61 560Z Series 5104045 61 Inch Deck (High Lift) 3 Pack

What It Is

The 8TEN LawnRAZOR Blade is a high-lift replacement blade set designed for Snapper zero-turn mowers with a 61-inch cutting deck, specifically the ZT61 560Z Series. It’s built for heavy grass, wet conditions, or bagging, using aggressive lift to throw clippings up and out.

Fitment & Compatibility

• Deck size: Only fits 61-inch decks. Measure your deck width before buying—this is non-negotiable.
• Model/Series: Confirmed for Snapper ZT61 560Z and similar models using OEM part #5104045. Double-check your mower’s model number (e.g., ZT61…).
• OEM vs aftermarket: This is a direct aftermarket replacement for Snapper’s 5104045 blade. It’s not OEM, so expect slight differences in steel thickness or balance.
• Measurements: Each blade is about 20.5 inches long, 2.5 inches wide, with a 1-inch center hole and 0.5-inch offset. Verify your spindle bolt pattern matches (typically 5-point star or 6-point star).
• Deck clearance: High-lift blades can cause clogs in low-clearance or mulching decks. Ensure your deck has a high-lift chute or bagger kit.

Key Things to Know

• Installation difficulty: Easy—just a 15/16-inch socket and torque wrench (recommended 70-90 ft-lbs). No special tools needed, but lift the deck safely.
• Quality: Users report good sharpness out of the box, but some note they dull faster than OEM. Expect 1-2 seasons of regular use before replacement.
• Common gotcha: High-lift blades create more suction, which can lift debris into the driver’s area. Wear eye protection and keep the deck clean.
• 3-pack value: At ~$14 per blade, it’s cheaper than OEM singles. Ideal if you need to replace all three at once.

Should You Buy It

If you own a Snapper ZT61 560Z with a 61-inch deck and need reliable high-lift blades for bagging or tall grass, this is a solid budget pick. Skip it if you prefer OEM longevity or have a mulching-only setup—low-lift blades are better there.