8TEN LawnRAZOR Blade for Honda H1011 H1011K1 H1011R H3011H H3011 H1011H 30" Deck 72511-772-L00 (Ultra High Lift)

What It Is

The 8TEN LawnRAZOR is a direct-replacement ultra-high-lift blade designed for Honda 30-inch commercial walk-behind mowers. It maximizes suction and clipping discharge for bagging or dense grass conditions.

Fitment & Compatibility

• Deck size: 30 inches (blade length is 30" overall, check your deck’s bolt pattern).
• Honda models: H1011, H1011K1, H1011R, H3011H, H3011, H1011H. Also fits any Honda 30" deck that uses OEM part #72511-772-L00.
• OEM vs aftermarket: This is an aftermarket replacement. It matches OEM specs for hole size (typically 1" center hole with 5-point star pattern) and thickness.
• Measure before buying: Confirm your existing blade’s length from tip to tip, center hole diameter, and bolt pattern. If your current blade is not 30" or uses a different drive star, this won’t fit.

Key Things to Know

• Ultra high lift = more power draw. Expect slightly higher engine load and reduced runtime per tank. Best for bagging, not mulching.
• Installation is straightforward. Use a torque wrench to 35–45 ft-lbs. Apply anti-seize to the blade bolt to prevent seizing.
• Sharp out of the box but may need a quick balance check. These blades are balanced at the factory, but a bench balancer is cheap insurance.
• Not for Honda 21" or 42" decks. This is strictly a 30" deck blade.

Should You Buy It

Buy this blade if you own a Honda 30" H-series mower, need maximum bagging performance in thick or wet grass, and want a budget-friendly alternative to OEM blades. Skip it if you mostly mulch or cut dry, short lawns—a standard-lift blade will be more efficient.