8TEN Deck Rebuild Kit for MTD Cub Cadet Huskee 54 inch LGT1054 SLT1554 LGTX1054 SLTX1054 Blade Spindle Belt Idler

What It Is

This is a complete deck rebuild kit for 54-inch MTD-built mowers (Cub Cadet, Huskee, Troy-Bilt, etc.), including three blade spindles, two deck belts, and idler pulleys—everything needed to restore a worn-out cutting deck to like-new condition.

Fitment & Compatibility

• Deck size: 54-inch stamped or fabricated deck only. Measure your deck width before ordering.
• Models confirmed: Cub Cadet LGT1054, SLT1554, LGTX1054, SLTX1054. Also fits many Huskee, Troy-Bilt, and MTD Gold models with 54-inch decks.
• OEM cross-reference: Replaces Cub Cadet spindles 918-04127, belts 954-03010 (deck) and 954-03011 (drive), and idler pulleys 918-05153. Verify your existing part numbers.
• Measurement check: Spindle bolt pattern is 3-hole, 3.5-inch center-to-center. Belt lengths are 96.5" (deck) and 84.5" (drive). Measure your old belts and spindle bolt spacing.

Key Things to Know

• Quality: 8TEN is a budget-friendly aftermarket brand. Spindles are steel, not cast iron—acceptable for homeowner use but may wear faster under heavy commercial use.
• Installation difficulty: Moderate. Requires removing deck, swapping spindles (watch for left/right orientation), and routing belts per diagram. A floor jack helps.
• Common gotcha: The included idler pulleys may have different bearing quality than OEM. Check for smooth spin before installing; replace if gritty.
• Belt routing: The deck belt is tricky—use the routing decal on the deck or a photo from before disassembly. Wrong routing causes poor cut and belt wear.

Should You Buy It

If you have a 54-inch MTD/Cub Cadet mower with worn spindles (noisy, wobbling) or shredded belts, this kit is a cost-effective single-order solution for homeowners. It’s not for commercial operators needing heavy-duty parts—OEM spindles last longer. For the price, it beats buying spindles and belts separately.