8TEN Deck Rebuild Kit for AYP Husqvarna Poulan LT152 YTH2042 YTA18542 LT2217A LT2223A2 Blade Spindle Belt

What It Is

An all-in-one deck rebuild kit for AYP/Husqvarna/Poulan lawn tractors, containing the blade spindle assemblies, mandrels, belts, and hardware needed to fully restore the cutting deck’s rotating components on 42- to 54-inch decks.

Fitment & Compatibility

• Check your deck size and model: This kit fits Husqvarna YTH2042, YTA18542, LT2217A, LT2223A2, Poulan LT152, and many AYP-built 42–54 inch decks. Measure your deck width and spindle bolt pattern (typically 3.5–4 inches center-to-center) to confirm.
• OEM cross-reference: Replaces Husqvarna 532140295, 532140296, 532140297 spindles and AYP 174336, 174337 belts. Verify your existing part numbers.
• Deck type: Designed for stamped steel decks, not fabricated/fabricated-deck models. Check if your deck uses a single or double V-belt pulley setup—this kit includes both.
• Measure belt length: The included belt is for 42–46 inch decks; if you have a 48–54 inch deck, you’ll need a longer belt (usually 105–108 inches).

Key Things to Know

• Quality vs OEM: 8TEN spindles use sealed ball bearings and heavy-duty steel housings—similar durability to OEM at roughly half the cost. Some users report slight bearing noise break-in for the first hour.
• Installation difficulty: Moderate. Requires removing the deck, old spindles, and belts. You’ll need a socket set, torque wrench (spindle bolts: 30–40 ft-lbs), and a puller if spindle nuts are rusted.
• Common gotchas: The kit’s spindle bolts may be metric (M10x1.5) while OEM are SAE—check your deck’s bolt pattern. Also, the included belt may be slightly tighter than OEM; ensure deck tensioner is properly adjusted.
• Includes: Two or three spindles (depending on deck), two belts, and all mounting hardware. Not for zero-turn or walk-behind mowers.

Should You Buy It

Buy this if your Husqvarna/Poulan/AYP tractor deck has worn, noisy, or wobbly spindles and you want a complete, cost-effective refresh. It’s ideal for DIYers comfortable with deck removal and basic mechanical work. Skip it if you need only a single spindle or belt, or if your deck is a fabricated (welded) model—those require different spindles.