799868 Carburetor + 795259 Cleaner Cover For Brriggs & Stratton 14111 498170 497314 497586 498254 694202 799872 790821 Craftsman 4-7 hp Engine With 496116 795259 Air Filter Primer Base

What It Is

This is a complete carburetor replacement (part 799868) paired with a primer/cleaner cover (part 795259) for Briggs & Stratton engines used in Craftsman lawn mowers, tractors, and other small equipment. It’s designed for 4-7 hp engines that use the 496116 air filter and primer base assembly.

Fitment & Compatibility

Before buying, check your engine’s model number (stamped on the blower housing or valve cover). This kit fits Briggs & Stratton engines with model numbers 14111, 498170, 497314, 497586, 498254, 694202, 799872, and 790821. It also replaces OEM carburetors 799868 and 790821. The primer cover (795259) is specific to the 496116 air filter base—if your mower uses a different air filter (e.g., round foam or paper), this won’t match. Measure the carburetor mounting bolt spacing (usually 2.5 inches center-to-center) and verify your fuel line size (3/16” or 5/16”). This is an aftermarket kit, not OEM Briggs & Stratton, so expect minor fit variations on older engines.

Key Things to Know

• Quality: Aftermarket carburetor—works reliably on most engines, but some users report needing to adjust the float height or clean out debris from manufacturing. Check the gaskets for proper alignment.
• Installation Difficulty: Moderate. You’ll need a socket set, pliers, and possibly a new fuel line. Drain the fuel tank and remove the old carburetor—watch for small springs and linkage clips that can easily drop into the engine housing.
• Common Gotchas: The primer bulb cover may feel tight or not snap in place perfectly; apply gentle pressure and ensure the air filter base is seated correctly. If the engine runs rough after install, clean the fuel bowl and adjust the idle screw (counterclockwise to lean, clockwise to richen).
• Includes: Carburetor, primer cover, and gaskets—but no air filter or fuel line. The primer cover is plastic and may crack if overtightened.

Should You Buy It

Buy this if you have a Craftsman mower with a Briggs 4-7 hp engine listed above, your carburetor is clogged or leaking, and you want a budget-friendly replacement that’s ready to install with basic tools. Skip it if you need OEM exact fit, have a different air filter base, or your engine is older than 15 years—then consider a full OEM rebuild kit.