795757 Gator Mulching Mower Blades Compatible with Hust-ler 48" Deck John Dee-re Scag Freedom Z 48, Blade Replaces 038-5350-00 481706 482877 AM104489 481706 PC1255, 3 Pack

What It Is

The 795757 Gator Mulching Mower Blades are a 3-pack of aftermarket mulching blades designed for 48" zero-turn mower decks from Hustler, John Deere, and Scag. They replace OEM part numbers 038-5350-00, 481706, 482877, AM104489, and PC1255.

Fitment & Compatibility

Before buying, verify three things:

• Deck size: Only fits 48" decks—not 42", 54", or 60".
• Blade measurements: Confirm your current blade length (approx. 18.5"), center hole diameter (typically 1" or 5/8"), and thickness (0.187"). Measure if unsure.
• Brand models: Fits Hustler 48" decks, John Deere Z335E/Z345R/Z445/Z535M (48" deck), and Scag Freedom Z 48". Not for all zero-turns—check your deck model against the OEM numbers above.

Key Things to Know

• Mulching vs. standard: These are mulching blades with a curved, serrated design. They cut clippings finer than standard blades, so you can leave them on the lawn. Not ideal for bagging or side discharge—swap to standard blades for those.
• Installation: Moderate difficulty due to blade orientation—the curved edge must face upward toward the deck. Use a torque wrench to tighten bolts to 70–90 ft-lbs (check your manual). Always disconnect the spark plug first.
• Quality: Gator blades are known for durability, but these are aftermarket—not OEM. Expect slightly different balance or metal hardness. Run a quick check by spinning the blade on a nail to ensure it doesn’t wobble.
• Common gotcha: Some users report the center hole is slightly tight on certain spindles. If it won’t slide on, lightly file the hole—don’t force it. Also, these are 3 blades, not 2 or 4—verify your deck uses 3 blades before ordering.

Should You Buy It

Buy these if you own a 48" Hustler, John Deere, or Scag Freedom Z and want a budget-friendly mulching upgrade that reduces bagging frequency. Avoid if you need OEM fitment or primarily bag/discharge clippings—stick to standard blades for those tasks. At $30.99 for a 3-pack, they’re a solid value for DIY mulching maintenance.