754P06094 Mower Deck Belt Fit for Cub Cadet Ultima ZT2 ZT3 ZTX4 ZTX5 ZTX6 60" Deck Zero-Turn Mowers Replace# 754-06094 (5/8" x 162")

What It Is

This is a replacement deck drive belt for Cub Cadet Ultima ZT2, ZT3, ZTX4, ZTX5, and ZTX6 zero-turn mowers with a 60-inch cutting deck. It transfers engine power to the spindles to spin the blades.

Fitment & Compatibility

• Deck size: Only fits 60" decks. Do not use on 48", 54", or 72" models.
• Model series: Cub Cadet Ultima ZT2 (all sub-models), ZT3, ZTX4, ZTX5, ZTX6 with 60" fabricated decks.
• OEM reference: Replaces Cub Cadet original part #754-06094.
• Measurements: 5/8" wide x 162" effective outside length. Verify your old belt matches these numbers before ordering.
• Aftermarket note: This is not a genuine Cub Cadet belt, but is listed as a direct fit. Check belt thickness – some users report it’s slightly thinner than OEM, which may affect tension.

Key Things to Know

• Installation difficulty: Moderate. You’ll need to remove the deck or at least the belt guard and tension pulley. A belt routing diagram is printed on the deck top.
• Quality: Made from EPDM rubber with Kevlar cords. Holds up well for residential use, but heavy commercial users may get shorter life than OEM.
• Common gotcha: The belt may feel tight during first install. Use the deck’s tension lever to fully relieve spring pressure before trying to slip the belt onto the last pulley.
• Check pulleys: Worn or rough spindles will shred any belt quickly. Spin each pulley by hand before installing – replace if they wobble or grind.

Should You Buy It

If you own a Cub Cadet Ultima with a 60" deck and need a budget-friendly replacement for residential mowing, this belt is a solid choice. It fits as advertised and saves roughly 30% over the OEM part. For commercial use or if you want maximum durability, stick with the genuine Cub Cadet belt.