734-04018 Front Drive Wheels Fit for Troy Bilt TB240 Mower- 8" Lawn Mower Wheels Tires for Troy Bilt Tuff Cut 210 230 Craftsman MTD Self Propelled Mower 12AV569Q597, Set of 2

What It Is

This is a set of two 8-inch front drive wheels designed for self-propelled lawn mowers, specifically replacing the OEM 734-04018 part. They are commonly used on Troy-Bilt TB240, Tuff Cut 210/230, Craftsman, and MTD models like the 12AV569Q597.

Fitment & Compatibility

Before buying, verify these three things:

• Model number – Check your mower’s model tag (usually under the seat or on the frame). This wheel fits Troy-Bilt TB240, TB230, TB210, Craftsman 12AV569Q597, and MTD self-propelled mowers with 8” front wheels.
• Wheel size – Confirm your current front wheel is 8 inches in diameter (measured from tire edge to tire edge, not the rim).
• Bearing type – These are direct replacements with the same axle hole size (usually 5/8” or 3/4”). Measure your axle diameter to be sure. They are not universal; they match the OEM spline/drive system on these specific mowers.

Key Things to Know

• Quality – Solid aftermarket option with good tread for traction on grass and light dirt. Some users report slightly softer rubber than OEM, but durability is fine for residential use.
• Installation – Easy swap. Remove the old wheel’s cotter pin or clip, slide off the old wheel, and press the new one on. No special tools needed.
• Common gotcha – The drive pin/gear inside the wheel hub must align with your mower’s drive shaft. If the mower uses a different drive system (e.g., pin vs. hex), these won’t work. Double-check your old wheel’s hub shape.
• Set of two – You get both front wheels; rear wheels are sold separately.

Should You Buy It

If you own a Troy-Bilt TB240, Tuff Cut 210/230, or a compatible Craftsman/MTD self-propelled mower and need a budget-friendly, direct-fit front wheel replacement, this is a solid choice. It’s easy to install and has strong reviews for basic mowing. Skip it if your mower uses a different axle size or drive system.