72610-VG3-030 Blade Holder Compatible With Honda Lawn Mover Engine Blade Adapter For HRN216, HRR216 K6 K7 K8 K9 K10 K11, HRS216 K5 K6 K7, HRX217 K2 K3 K4 K5 K6 Blades Bracket With Bolts and Spacer

What It Is

This is a Honda OEM-spec blade holder (part 72610-VG3-030) that secures the blade to the crankshaft on select Honda walk-behind mowers. It replaces the original adapter, bracket, bolts, and spacer in one kit, restoring proper blade engagement and preventing slipping during cutting.

Fitment & Compatibility

• Models confirmed fit: HRN216 (all), HRR216 K6–K11, HRS216 K5–K7, HRX217 K2–K6.
• Check your model number: Look on the sticker under the mower deck or near the handle. The “K” suffix matters (e.g., HRR216K9 works, HRR216K4 does not).
• Deck size: Works with 21-inch and 22-inch decks on these models only.
• OEM vs aftermarket: This is an aftermarket copy of the Honda 72610-VG3-030. Measure your existing adapter’s outer diameter (should be ~1.5 inches) and bolt pattern (three holes, 120° apart) to confirm.
• Includes: Blade holder bracket, two bolts, one spacer. Does NOT include the blade or drive belt.

Key Things to Know

• Installation difficulty: Moderate. You’ll need a socket wrench, torque wrench (30–35 ft-lbs), and a blade removal tool or block of wood to lock the blade.
• Common gotcha: Torque the bolts to spec – overtightening can strip the crankshaft threads; undertightening causes blade wobble.
• Quality note: Some users report the bolts are softer than OEM. If you mow heavy grass or debris, consider replacing bolts with Honda factory ones (part 95701-06040).
• Spacer orientation: The spacer goes between the blade and the bracket – the beveled side faces the blade. Reversing it will cause vibration.

Should You Buy It

Buy this kit if you own a listed Honda model and your original blade adapter is worn, cracked, or missing bolts. It’s a budget-friendly fix for a common issue, but if you want absolute reliability or mow commercially, stick with the genuine Honda part for about $10 more.