71440001 High Lift Notched Mower Blacdes Compatible with Wright Stander 36" & 52" Deck, Replaces 48108 212275 481771 482878, 2 Pack

What It Is

This is a 2-pack of high-lift notched mower blades designed to improve grass lift and discharge on Wright Stander zero-turn mowers with 36" or 52" decks. The aggressive lift curve pulls clippings up and out, reducing clumping in dense or wet grass.

Fitment & Compatibility

Check before buying:

• Deck size: Only for Wright Stander 36" and 52" decks. Does not fit 48" or 60" decks.
• OEM cross-references: Replaces Wright part numbers 48108, 212275, 481771, 482878. Verify your current blade’s part number matches one of these.
• Measurements: Blade length is 18 inches, center hole is 5/8”, and thickness is 0.25”. Measure your existing blade to confirm.
• Aftermarket note: These are not OEM Wright blades but are spec-matched. Check that your spindle can handle a high-lift blade (some older spindles may have clearance issues with the notch).

Key Things to Know

• Installation: Simple bolt-on swap. Use a torque wrench to tighten to 70–80 ft-lbs. Do not overtighten.
• Lift performance: High-lift blades increase suction, which improves bagging and side-discharge but may reduce engine power slightly on thick grass.
• Notch: The notch reduces blade tip speed slightly but helps prevent grass wrap on the spindle. Not all Wright decks use notched blades—verify your deck has the notch groove.
• Durability: These are stamped steel (not heat-treated or hardened). They wear faster than premium OEM blades in sandy or rocky soil.

Should You Buy It

If you own a Wright Stander 36" or 52" deck and need a budget-friendly replacement that matches OEM specs, this 2-pack is a solid value. It’s best for homeowners or light commercial use where you prioritize improved clipping lift over extreme blade longevity. Skip it if you mow heavy commercial hours or need hardened blades for abrasive conditions.