71440001 High Lift Notched Mower Blacdes Compatible with Wright Stander 36" & 52" Deck, Replaces 48108 212275 481771 482878, 10 Pack

What It Is

This is a 10-pack of high-lift notched mower blades designed for Wright Stander commercial zero-turn mowers with 36" or 52" decks. The high-lift profile increases airflow under the deck for better grass lift and discharge, making it ideal for bagging or side-discharge in thick or wet grass.

Fitment & Compatibility

Before buying, confirm your Wright Stander deck size is exactly 36" or 52" (not 42", 48", or 60"). These blades replace OEM part numbers 48108, 212275, 481771, and 482878. Measure your existing blade length—these are typically 18-5/8" long, but always verify. The notch pattern must match your blade spindle’s drive pins or star pattern; check that the center hole and notch alignment are identical to your current blades. This is an aftermarket set, not OEM Wright or MTD parts, so fit may vary on non-standard or modified decks.

Key Things to Know

• Quality: Aftermarket heat-treated steel; sharpness and balance may require light sharpening and balancing before first use. Expect slightly shorter lifespan than OEM under heavy commercial use.
• Installation difficulty: Easy if you have a blade removal tool and torque wrench (recommended 70-90 ft-lbs). Use thread locker on spindle bolts to prevent loosening.
• Common gotcha: High-lift blades increase engine load and fuel consumption—not ideal for dusty or sandy conditions (will wear faster). They also create more noise and vibration than standard blades.
• Pack size: 10 blades means you get nearly 2 full sets for a 52" deck (3 blades per set) or 2.5 sets for a 36" deck (2 blades per set). Good for fleet maintenance or heavy-season replacement.

Should You Buy It

If you own a Wright Stander 36" or 52" deck and need high-lift blades for bagging or side-discharge in lush grass, this is a solid value at ~$11 per blade. It’s less suited for mulching or dry, dusty conditions. Verify your blade measurements and notch pattern before ordering—if they match, this pack saves money over OEM equivalents for high-volume cutting.