7019515 High Lift Blades Fit for Sna pper 28" Deck Rear Engine Rider Mower Replaces 1-9515 7019515BMA 7019515BZ 7019515BZYP 050200 (1PACK)

What It Is

This is a high-lift replacement blade (OEM part number 7019515) designed to improve grass discharge and bagging performance on Snapper rear-engine rider mowers with a 28-inch cutting deck. It’s ideal for thick or wet grass where standard blades leave clumps.

Fitment & Compatibility

• Deck size: Only for 28-inch Snapper rear-engine rider decks. Measure your deck width to confirm—most Snapper 28” decks use a 21.5” blade length with a 1” center hole and 7-point star drive.
• Model fit: Fits Snapper models like 2812, 2813, 2814, 2816, 2818, 2820, and many 2800-series RERs. Check your owner’s manual or existing blade part number (e.g., 1-9515, 7019515BMA, 7019515BZ).
• OEM vs aftermarket: This is a direct replacement for OEM Snapper 7019515. Confirm your blade’s center hole size and drive pattern (star vs. oval) before buying—some older decks use a different drive.
• Measurements: Blade length 21.5”, width 2.5”, thickness 0.1875”. If your blade is shorter or wider, this won’t fit.

Key Things to Know

• High lift = more power draw: Expect a slight RPM drop on underpowered engines. Ensure your mower’s belt and pulleys are in good shape.
• Installation: Easy bolt-on with a 5/8” socket. Torque to 40-50 ft-lbs. Use a blade balancer afterward—unbalanced high-lift blades cause vibration.
• Common gotcha: The 7-point star drive is specific to Snapper. If your deck uses a 5-point star or oval hole, this blade won’t mount.
• Quality: Heat-treated steel with a painted finish. Not hardened to OEM standards—may dull faster in sandy soil.

Should You Buy It

Buy if you need a budget-friendly high-lift blade for a Snapper 28” RER deck and you’re bagging or side-discharging heavy grass. Skip it if your mower has a 5-point drive or you cut fine turf—you may want OEM for longer edge life.