696854 Oil Filter for Brigs and Straton 492932S 492932 695396 795890 492056 842921 Pack of 3

What It Is

This is a pack of three aftermarket oil filters (part number 696854) designed for Briggs & Stratton engines. It’s for lawn mowers, tractors, zero-turns, and small engines that require a spin-on oil filter—typically models with a horizontal or vertical shaft and a standard filter mount.

Fitment & Compatibility

• Check your engine model: This filter replaces Briggs & Stratton OEM numbers 492932S, 492932, 695396, 795890, 492056, and 842921. Common engines include Intek, Vanguard, and Endurance series.
• Measurements: 2.5” diameter, 3.25” height, 3/4”-16 thread. Verify your filter mount matches these specs.
• Deck size irrelevant: Fitment depends on engine model, not mower deck size. Cross-reference your engine’s filter number (printed on the old filter or in the manual) against the list above.
• Aftermarket: Not OEM, but meets or exceeds OEM specs for flow and filtration. Safe for most residential and light commercial use.

Key Things to Know

• Quality: Solid aftermarket build with a silicone anti-drainback valve and high-efficiency media. Comparable to OEM at a fraction of the cost.
• Installation: Easy—hand-tighten 3/4 turn after gasket contacts the base. Use a filter wrench if stuck, but don’t overtighten.
• Common gotcha: Some Briggs engines use a different thread (e.g., 1”-12). Always verify thread size before buying—this filter is 3/4”-16 only.
• Oil change required: Replace filter every 50 hours or annually, and always with fresh oil (typically SAE 30 or 10W-30, check your manual).

Should You Buy It

Yes, if you own a Briggs & Stratton engine that uses one of the listed OEM filter numbers and you want a reliable, affordable three-pack for regular oil changes. It’s a solid value for DIY homeowners who mow a standard lawn and don’t need OEM branding. Skip it if your engine uses a different thread or you prefer genuine parts for commercial-duty equipment.