600901 603992 O regon G3 Gator Blades 60" 42" Decks Compatible with Hustler Z, Diesel Z, Super 104, Raptor SDX SD XD XL X, Replace 793794 794230 793935 794214 602771 794685, 3 Pack

What It Is

This is a 3-pack of Oregon G3 Gator mulching blades (models 600901 / 603992) designed for 60" and 42" zero-turn mower decks. They lift, cut, and recirculate clippings for finer mulch, and are a direct aftermarket replacement for Hustler OEM blades on commercial-grade mowers like the Z, Diesel Z, Super 104, and Raptor SDX/SD/XD/XL/X series.

Fitment & Compatibility

Before buying, confirm three things:

• Deck size: These blades fit only decks listed as 60" or 42". Double-check your deck measurement (cutting width) – a 60" deck requires 3 blades, a 42" deck also uses 3, but the blade length differs. Verify your specific deck model.
• OEM cross-references: They replace Hustler part numbers 793794, 794230, 793935, 794214, 602771, and 794685. If your mower uses any of these, these blades will fit.
• Physical check: Measure your current blade length, center hole diameter (typically 1" or 7/8"), and spindle pattern. The G3 Gators are standard 3-hole pattern with a 1" center hole. If your deck uses a 7/8" center hole or non-standard pattern, these won’t work.

Key Things to Know

• Quality: Oregon G3 Gators are heat-treated, hardened steel with a multi-step heat process. They hold an edge longer than many budget blades but will dull faster on sandy or rocky lawns.
• Installation difficulty: Easy if you have a blade removal tool and torque wrench. Torque to 70-90 ft-lbs. Use a thread locker if your spindles are aluminum to prevent loosening.
• Common gotcha: These are mulching blades, not standard lift blades. They produce finer clippings but will not throw clippings as far into a bagger – fine for mulching, poor for bagging or side discharge.
• Pack contents: 3 blades – enough for one 60" or 42" deck. No hardware included; reuse your existing bolts/washers if in good condition.

Should You Buy It

Buy these if you have a compatible Hustler Z, Diesel Z, Super 104, or Raptor SDX/SD/XD/XL/X with a 60" or 42" deck and you want a proven aftermarket mulching blade at a lower price than OEM. Skip them if you need a dedicated bagging or high-lift blade, or if your deck uses non-standard center holes or spindle patterns.