60" Deck Mower Blades Assembly Fit for Bad Boy ZT CZT Pup 60" Maverick Zero Turn Lawn Mower Replaces OEM 038-6050-00 038-6060-00 (3 Pack)

What It Is

This 3-pack of 60-inch deck mower blades is designed for Bad Boy zero-turn mowers, specifically the ZT, CZT, Pup, and Maverick models. It replaces OEM part numbers 038-6050-00 and 038-6060-00, providing a direct, ready-to-install set for cutting grass on residential or commercial properties.

Fitment & Compatibility

Before buying, verify three things:

• Deck size: Only for 60-inch cutting decks. Measure your deck width if unsure.
• Model compatibility: Confirmed for Bad Boy ZT, CZT, Pup, and Maverick models. Check your mower’s model number and year—older or non-standard Bad Boy decks may differ.
• OEM part numbers: These blades replace 038-6050-00 and 038-6060-00. If your mower uses a different OEM number (e.g., 038-6040-00), these won’t fit.
• Measurements: Each blade is approximately 20.5 inches long with a 5-point star center hole and a 1-inch diameter. Measure your existing blade’s length, center hole shape, and diameter to confirm match.

Key Things to Know

• Quality: These are aftermarket blades, not OEM Bad Boy. They may be slightly thinner or less durable than originals, but sufficient for standard residential use.
• Installation: Easy DIY job—remove the old blade, install the new one with the sharp edge facing the deck rotation direction. Torque bolts to 70-90 ft-lbs. Use a blade balancer after install.
• Common gotcha: The 5-point star hole must align perfectly with your spindle. If your spindle uses a different shape (e.g., oval or hex), these won’t fit.
• Performance: These blades are designed for mulching or standard cutting. For bagging, you may need a different lift profile.

Should You Buy It

Buy this set if you own a Bad Boy 60-inch ZT, CZT, Pup, or Maverick mower and need a budget-friendly replacement for the OEM 038-6050-00 or 038-6060-00 blades. It’s a solid value for residential cutting, but if you run a commercial operation or demand maximum durability, stick with OEM blades. For most homeowners, this is a reliable, cost-effective option that saves roughly 30-50% over dealer parts.