594062 Rewind Recoil Starter Pull Start for 594062 093J02 103M02 103M05 103M0B 104M02 Engine Lawn Mower

What It Is

This is a replacement recoil starter assembly (pull start) for 594062, 093J02, 103M02, 103M05, 103M0B, and 104M02 engines — typically found on walk-behind lawn mowers from brands like MTD, Troy-Bilt, Cub Cadet, and Craftsman. It pulls the starter rope to crank the engine when the original unit fails or becomes worn.

Fitment & Compatibility

• Engine models: Confirm your engine model number (stamped on the engine shroud) matches one of the listed numbers above. This is not a universal part.
• Deck size: Not relevant — fit is determined by the engine, not the mower deck.
• Brand: Works with MTD, Troy-Bilt, Cub Cadet, Craftsman, and other mowers using those specific engines. Check your mower’s make and model against OEM part 594062.
• OEM vs aftermarket: This is an aftermarket replacement. Measure the bolt hole spacing (typically 2.75 inches center-to-center) and the overall diameter (about 4.5 inches) to compare with your old unit.
• What to check: Remove the old starter and verify the mounting hole pattern, pulley diameter, and rope length (usually around 60 inches). Also check that the recoil spring is intact — this part comes pre-assembled.

Key Things to Know

• Installation difficulty: Easy to moderate — requires removing 2-3 bolts, transferring the rope guide (if needed), and routing the rope through the handle. No special tools required.
• Common gotcha: The rope may be slightly longer than OEM. Trim it to match the original length for proper recoil action and to avoid jamming.
• Quality: 4.4-star rating from 39 reviews suggests good reliability, but some users report the plastic housing is less durable than OEM. Handle with care during installation.
• Return policy: Since it’s an aftermarket part, verify the seller’s return policy — fitment issues are the most common reason for returns.

Should You Buy It

If you have one of the listed engines and your original starter is broken, jammed, or the rope snapped, this is a solid, cost-effective replacement. It’s not OEM-quality but works well for most homeowners. Avoid if you need a perfect OEM match or have a different engine model — measure first.