587686701 54 Inch Deck Belt for Husqvarna LGT2654 LGT2554 YTH24V54 YTH24K54 GTH26V54 GTH260 Replace 196103 532196103 Craftsman 33155 Poulan 54" Aramid Cord Mower Belt 5/8" x 147.5"

What It Is

This is a 54-inch deck belt (5/8" width, 147.5" length) designed to drive the mower blades on Husqvarna, Craftsman, and Poulan lawn tractors with a 54-inch cutting deck. It’s an aftermarket replacement using aramid cord for added strength and heat resistance.

Fitment & Compatibility

Before buying, confirm your mower has a 54-inch deck and that the original belt measures 5/8" x 147.5". This belt replaces OEM part numbers 196103 and 532196103, and fits these models:

• Husqvarna: LGT2654, LGT2554, YTH24V54, YTH24K54, GTH26V54, GTH260
• Craftsman: 33155 (and other 54" deck models using the same belt)
• Poulan: models with a 54" deck and this belt spec

Check your deck’s belt routing diagram – some models route the belt differently around pulleys. Measure your old belt to ensure 147.5" length; a belt that’s too long or short will cause slippage or poor blade engagement.

Key Things to Know

• Aramid cord vs. Kevlar – Aramid is similar in strength but slightly less heat-resistant than OEM Kevlar belts. Fine for residential use, but may wear faster under heavy or frequent mowing.
• Installation difficulty – Moderate. You’ll need to remove the deck, release tension from the idler pulley, and route the belt around all pulleys. Check the belt routing diagram under the deck or in your manual.
• Common gotcha – The belt can be tight to install on new pulleys. Use a pry bar or belt tool to lever the belt over the idler pulley – don’t force it with a screwdriver that could damage the belt edge.
• Aftermarket quality – At $28.99, it’s cheaper than OEM, but some users report slightly shorter lifespan (2-3 seasons vs. 4-5 for OEM). Good for budget replacements.

Should You Buy It

If you need a reliable, affordable replacement for a 54-inch Husqvarna, Craftsman, or Poulan deck belt and don’t require OEM longevity, this is a solid choice. It’s not the toughest belt on the market, but it works well for typical residential mowing and is easy to find. Avoid it if you mow commercially or want maximum belt life – stick with OEM in that case.