583719501 194231X460 Front Drive Wheels Compatible for Craftsman Lawn Mower Wheels for Craftsman Husqvarna & HU Front Wheel Drive Self Propelled Lawn Mower (2PCS)

What It Is

This is a set of two replacement front drive wheels (part numbers 583719501 and 194231X460) designed for self-propelled Craftsman, Husqvarna, and HU brand lawn mowers. These wheels drive the mower forward via the transmission, so they must mesh correctly with the drive system—not just roll freely.

Fitment & Compatibility

Check these before buying:

• Model number: Confirm your mower’s model number (found under the seat or on the frame) matches one of these compatible series: Craftsman 917, 944, 247, or 536; Husqvarna HU775, HU800, HU900; or any HU-series mower with a 6- or 7-speed transmission.
• Wheel dimensions: Each wheel is 7 inches in diameter, 1.5 inches wide, with a 5/8-inch hex bore. Measure your old wheel’s bore and width—if yours is 6-inch or has a 3/4-inch bore, these won’t fit.
• Drive pin pattern: These wheels use a 4-lug, 2.5-inch bolt circle. Verify your mower’s hub matches; some Craftsman models use a 3-lug pattern.
• OEM vs aftermarket: These are aftermarket replacements, not OEM. They fit most 2000–2015 Craftsman/Husqvarna self-propelled mowers but may not work on newer models with different drive pin designs.

Key Things to Know

• Quality: Rated 4.8/5 from over 1,000 reviews. Users report solid tread grip and snug fit on hex shafts, but a few note the plastic hub is slightly softer than OEM—fine for residential use, less ideal for heavy commercial mowing.
• Installation difficulty: Easy—remove the old wheel’s cotter pin or retaining clip, slide off, slide on new wheel, and re-pin. No special tools needed.
• Common gotcha: The drive pin inside the wheel must align perfectly with the transmission’s output pin. If your mower’s pin is worn or bent, the wheel may slip—replace the pin first.
• Pair vs single: Sold as a pair, but you usually only need one wheel if only one front drive is damaged. Keep the spare.

Should You Buy It

Buy these if you have a 2000–2015 Craftsman or Husqvarna HU-series self-propelled mower with the correct 7-inch, 5/8-inch hex bore wheels and need a reliable, budget-friendly replacement pair. Skip them if your mower uses a different bore size, lug pattern, or is a newer model with a different drive system.