54530-VL0-S01 Lawn Mower Brake Cable, Lawn Mower Drive Cable Fits for Honda HRR216 and HRX217 Walk-Behind Lawn Mowers,Lawn Mower Parts,1 Pack

What It Is

This is a genuine Honda brake cable (part #54530-VL0-S01) that controls the self-propel drive engagement and blade brake on Honda HRR216 and HRX217 series walk-behind mowers. It connects the control handle to the transmission/reel brake assembly, allowing you to stop forward motion and blade rotation safely.

Fitment & Compatibility

• Exact models: Confirmed fit for Honda HRR216K9-VKA, HRR216K9-VLA, HRR216TDA, HRR216VKA, HRX217HYA, HRX217K5-HYA, HRX217K5-HZA, and HRX217TDA.
• Deck sizes: Works with 21-inch and 22-inch decks on these series.
• OEM vs aftermarket: This is a genuine Honda OEM cable (not a third-party copy) so it matches original length, end fittings, and routing exactly.
• Measure before buying: Lay your old cable flat and measure from end to end. The OEM cable is approximately 48 inches long. If yours measures differently, double-check your model number.
• Check your model tag: Find the model and serial number sticker under the rear flap or on the deck – don’t rely on memory, as subtle sub-model differences exist.

Key Things to Know

• Installation difficulty: Moderate. You’ll need a 10mm wrench, pliers, and about 30 minutes. The hardest part is routing the cable through the handlebar tube and securing the spring clip at the brake lever.
• Common gotcha: The cable end at the transmission side can be tough to seat. Ensure the cable barrel is fully seated in the bracket slot before tightening the adjustment nut.
• Lubrication: Apply a drop of light oil to the cable ends and the spring at the brake lever before installation to reduce friction and extend cable life.
• Inspect the brake assembly: While you have the cable off, check the brake pad and drum for wear. A seized brake can cause premature cable breakage.

Should You Buy It

Buy this if you have a Honda HRR216 or HRX217 walk-behind with a broken, frayed, or stretched drive/brake cable and want a direct OEM replacement that will bolt on without modification. It’s the right choice for DIY owners who prefer exact fit over cheaper aftermarket cables that may require trimming or adapters.