54530-VL0-S01 Lawn Mower Brake Cable, Lawn Mower Drive Cable Fits for Honda HRR216 and HRX217 Walk-Behind Lawn Mowers,Lawn Mower Parts,1 Pack

What It Is

This is the OEM-style brake cable (also called a drive cable) for Honda HRR216 and HRX217 walk-behind mowers. It controls the blade brake and self-propel engagement—when the bail is released, it stops the blade and disengages the drive.

Fitment & Compatibility

• Exact models: HRR216K9, HRR216K9A, HRR216VKA, HRR216VLA, HRR216PDA, HRX217K5, HRX217K5A, HRX217HZA, HRX217HYA, and most HRX217 variants with a blade brake clutch (BBC) system.
• Check your model number: Look on a sticker under the rear discharge flap or on the frame near the engine. If it’s an HRR216 or HRX217 with a bail-style blade stop, this cable should fit.
• OEM vs aftermarket: This is a genuine Honda part, not a generic replacement. Exact fit, no modification needed.
• Measurement: Cable length is approximately 36 inches from end to end. Verify your old cable is roughly the same length before buying.
• Not for: HRR216 with a manual blade stop (no bail), or older HRX models (pre-2008) that use a different cable routing.

Key Things to Know

• Installation difficulty: Moderate. You’ll need a 10mm wrench and a pair of pliers. Plan on 20–40 minutes. The hardest part is threading the cable through the handlebar loop and reattaching the spring.
• Common gotcha: The cable ends are pre-swaged—you can’t adjust cable tension by moving the end fitting. Adjust tension only at the handle lever or the bracket near the transmission.
• Quality: OEM Honda cable uses a coated inner wire and a tough plastic sheath. It holds up better than cheap aftermarket cables, especially in wet grass or salt-treated yards.
• Signs you need it: Blade won’t stop when you release the bail, or the self-propel won’t engage/disengage smoothly. If the cable is frayed, kinked, or snapped, replace it immediately.

Should You Buy It

Yes, if you own a Honda HRR216 or HRX217 walk-behind with a blade brake clutch and need a reliable, exact-fit replacement. It’s priced competitively with aftermarket cables but offers peace of mind with genuine Honda quality. If your mower model isn’t listed or you’re not sure about the cable routing, double-check your model number first—this part is model-specific.