54510-VL0-P01 Clutch Cable, Replacement for 54510VL0P01, Fit for Honda HRR216K8 K9 Lawn Mower, Traction Control Ground Drive Self Propelled Cable

What It Is

The 54510-VL0-P01 clutch cable controls the self-propel engagement on Honda HRR216K8 and K9 lawn mowers. It connects the drive handle to the traction control system, enabling ground drive activation.

Fitment & Compatibility

Check your mower’s model number (on the deck or engine shroud): this cable fits Honda HRR216K8 and HRR216K9 only. Do not assume it works on other HRR216 variants (e.g., K4, K6, PKA) without verifying part cross-reference. OEM Honda part; no aftermarket alternative listed. Measure the old cable’s length (approx. 40 inches from housing end to end) to confirm. Verify your mower uses a single-cable, squeeze-handle self-propel system—not a dual-cable or thumb-lever design.

Key Things to Know

• Quality: OEM Honda part; matches original fit and durability. No adjustment needed if installed correctly.
• Installation: Moderate difficulty (20–30 minutes). Requires removing the handlebar cover and routing the cable through the frame. A small flathead screwdriver and pliers are needed.
• Common gotcha: The cable housing ends are not identical—one side has a larger barrel. Install the larger barrel on the drive handle side. Reversing them causes poor engagement or binding.
• Tension: If the mower still won’t engage after replacement, adjust the cable tension via the threaded barrel near the transmission, not the cable itself.

Should You Buy It

Buy this if you have an HRR216K8 or K9 with a broken, stretched, or frayed self-propel cable. It’s the correct OEM replacement at a fair price, with no fitment guesswork. Skip if your mower is a different HRR216 variant or uses a different self-propel design.