532197259 - Mower Keeper Belt Guide RH fits Craftsman Husqvarna AYP Poulan 197259

What It Is

The 532197259 Mower Keeper Belt Guide RH is a stamped steel bracket that prevents the deck drive belt from slipping off the pulley on the right-hand side of the mower deck. It’s designed for residential zero-turn and lawn tractors from Craftsman, Husqvarna, AYP, and Poulan Pro.

Fitment & Compatibility

Before buying, verify three things:

• Deck size & model: Fits 42", 46", 48", and 54" fabricated decks common on late-model Craftsman and Husqvarna ZT series (e.g., Z254, Z542). Check your mower’s model number, not just the brand.
• OEM vs aftermarket: This is an OEM replacement (original Craftsman/Husqvarna part). Aftermarket copies often have thinner metal and won’t hold the belt as securely.
• Measurements: Guide is 3.5" long, mounting hole spacing is 1.5" center-to-center. If your old guide has these dimensions, it’s a direct swap.

Common models: Craftsman ZT 7000 series, Husqvarna Z242F, Poulan Pro PPZ462T. Not for stamped-steel decks on older 100-series tractors.

Key Things to Know

• Quality: Stamped steel, zinc-plated. Holds up well if belt tension is correct, but can bend if you hit a solid object (stump, rock) at speed.
• Installation: Easy – 10 minutes. Two 5/16" bolts (often 7/16" head). Use thread locker if bolts are loose; vibration can back them out.
• Common gotcha: If your belt keeps jumping off, the guide might be bent, but the real cause is often a worn belt or loose idler pulley. Replace the belt at the same time if it’s glazed or stretched.
• No modifications needed – direct bolt-on for compatible decks. No drilling or trimming.

Should You Buy It

If your Craftsman, Husqvarna, or AYP mower’s belt keeps slipping off the right-hand pulley, this $11 OEM guide is the correct fix. It’s a low-cost, easy install that solves a common issue – but only if your belt and pulleys are in good shape. For worn belts, replace those first. Otherwise, this is a solid, no-guess buy.