482877 Mulching Toothed Mower Blades for Bad Boy Scag Freedom Z Hustler 48" Deck 795757 48 Inch Deck Mower Replace 038-5000-00 038-5350-00 038-5350-0050 795757 481706 3-IN-1 Mower Blades 3 Pack

What It Is

This is a set of three mulching toothed blades designed for 48-inch zero-turn mower decks. They replace multiple OEM part numbers and are intended for machines from Bad Boy, Scag, Hustler, and similar brands that use the standard 48" spindle layout.

Fitment & Compatibility

Before buying, verify these specifics:

• Deck size: Only fits 48-inch cutting decks. Measure your deck width to confirm.
• Blade dimensions: Each blade is 18.25 inches long, 2.5 inches wide, with a 5-point star center hole and a 0.5-inch diameter. Measure your existing blade length and center hole shape/size.
• OEM cross-reference: Replaces Bad Boy 038-5000-00, Scag 038-5350-00/038-5350-0050, Hustler 795757/481706, and others. Check your mower’s manual or current blade part number.
• Brand fit: Works on Bad Boy, Scag Freedom Z, Hustler, and many 48" decks using the same spindle pattern. Not universal—some brands (e.g., older Toro, John Deere) may use different hole shapes or lengths.

Key Things to Know

• Material & quality: These are aftermarket blades, not OEM. They’re made from hardened steel but may not match OEM thickness or balance exactly. Check for burrs or uneven edges before installation.
• Installation: Standard wrench job. Use a torque wrench to tighten to 70-90 ft-lbs. Ensure blades rotate freely after tightening.
• Mulching performance: The toothed design chops clippings finer than standard blades, but requires sharpening more often. Not recommended for wet grass—clogs easily.
• Common gotcha: The star center hole fits many spindles, but some decks use a different keyed or oblong hole. Verify your spindle’s center pin shape before buying.

Should You Buy It

If you have a 48" Bad Boy, Scag Freedom Z, or Hustler and want an affordable mulching blade set that replaces common OEM numbers, these are a solid value. However, if you need exact OEM fit, balance, or longer life for heavy commercial use, stick with factory blades.