46-inch Deck Belt 954-05022A / 1/2" x 108.3" -Compatible with Troy-Bilt Cub Cadet Craftsman 754-05022 954-05022 XT1 XT2 Enduro Series LT46, LT46 KH, LX46, LX46 KW, T2800, T3100, T8200, T225

What It Is

This is a 46-inch deck drive belt (1/2" wide x 108.3" long) designed to transfer power from the engine pulley to the mower deck blades on select Troy-Bilt, Cub Cadet, and Craftsman lawn tractors. It’s a direct replacement for OEM part numbers 754-05022 and 954-05022, commonly used on the XT1, XT2, Enduro Series, and LT/LX46 models.

Fitment & Compatibility

Before buying, verify your mower’s deck size is exactly 46 inches—this belt will not work on 42-inch or 54-inch decks. Check your owner’s manual or the old belt for the OEM number (754-05022 or 954-05022). This aftermarket belt matches those specs but may differ slightly in material or tension from genuine Cub Cadet belts. Also confirm your model number from the list: LT46, LT46 KH, LX46, LX46 KW, T2800, T3100, T8200, or T225. If your tractor has a different engine or deck design (e.g., fabricated vs. stamped), measure the old belt’s length and width to be safe.

Key Things to Buy

• Quality varies – At this price point, the belt is likely a standard rubber or Kevlar-reinforced aftermarket option. It may wear faster than OEM if you mow heavy, wet grass or have misaligned pulleys.
• Installation is moderate – You’ll need to remove the deck, release tension from the idler pulley, and route the belt around all pulleys. A diagram on the deck or in your manual helps avoid mistakes.
• Common gotchas – Check pulley condition: worn or rough pulleys will shred any belt quickly. Also ensure the belt is not twisted during installation. If the belt squeals or slips after install, re-check routing and tension.
• No warranty info – Aftermarket belts typically lack a manufacturer warranty, so inspect for defects before installing.

Should You Buy It

This belt is a budget-friendly option if you need a quick replacement for a 46-inch deck on a compatible Troy-Bilt, Cub Cadet, or Craftsman tractor and don’t mow professionally or in heavy conditions. For high-use or commercial mowing, consider spending more on an OEM belt for longer life and better fit.