42 inch Deck Rebuild Kit for Huskee LT4200 craftsman T1200 T1000 T1400 T100 T110 Troy Bilt Pony Bronco TB42 Mower Includes (2) 618-06991 918-06991 Spindle (2) 742-04312 Blade (1) 754-04060 Belt

What It Is

This 42-inch deck rebuild kit supplies the essential wear parts for a complete mowing deck overhaul on select Huskee, Craftsman, and Troy-Bilt tractors. It includes two spindle assemblies, two blades, and a drive belt—everything needed to restore cutting performance on a single 42" fabricated or stamped deck.

Fitment & Compatibility

Check your deck size: Must measure exactly 42 inches across (blade tip to blade tip).
Model cross-reference: Fits Huskee LT4200, Craftsman T1200/T1000/T1400/T100/T110, and Troy-Bilt Pony/Bronco/TB42. Verify your model number on the tractor’s data tag (under seat or on frame).
OEM vs aftermarket: The spindles (618-06991 / 918-06991) and blade (742-04312) are direct OEM replacements; the belt (754-04060) is a standard aftermarket equivalent.
Critical measurement: The spindle housing diameter and bolt pattern must match your deck’s mounting holes (typically 3-bolt pattern). Measure your old spindle before ordering.

Key Things to Know

• Quality: Spindles are cast iron with sealed bearings—durable for residential use. Blades are heat-treated steel, not hardened for heavy commercial abuse.
• Installation difficulty: Moderate. You’ll need a socket set, jack or ramps, and a torque wrench (spindle bolts: 30-35 ft-lbs; blade bolts: 70-80 ft-lbs). Expect 1-2 hours.
• Common gotcha: The belt (754-04060) is a specific length (92.5” x 1/2”). Double-check your deck’s belt routing diagram—some decks use a different belt if you have a different PTO pulley size.
• Tip: Replace all three items at once to avoid uneven wear; old spindles with new blades will still cause poor cut quality.

Should You Buy It

Yes, if you own one of the listed tractors and your deck is vibrating, cutting unevenly, or the belt is frayed. This kit is a cost-effective single-order solution for a full refresh—ideal for DIY homeowners who want to avoid multiple part purchases. Skip it if your deck is heavily rusted or the housing is bent (replace the deck instead).