(4-Pack) 19M7775 14M7303 Replacement Battery Terminal Bolts Nuts Stainless Steel for John Deere Mower Tractor

What It Is

This is a 4-pack of stainless steel battery terminal bolts and nuts designed to replace corroded or damaged battery connections on John Deere lawn mowers, tractors, and other small engines. It includes two M6x1.0 bolts and two M6 nuts, sized for standard battery terminal clamps.

Fitment & Compatibility

Before buying, confirm your battery terminal uses M6 (6mm) bolts—common on most John Deere models, including X300, X500, and D-series. Measure your existing bolt length; these are about 20mm long, which works for most clamps but may be too short for thicker terminals or dual-cable setups. Not compatible with SAE (American) or metric M8 terminals. This is an aftermarket replacement for OEM parts 19M7775 and 14M7303—same thread pitch and length, but not genuine John Deere. Verify your battery post type (top-post or side-post) is correct; these are for top-post battery terminals only.

Key Things to Know

• Corrosion resistance: Stainless steel won’t rust like the zinc-plated originals, but it’s slightly softer—avoid over-tightening (max 6-8 Nm torque).
• Installation: Takes 5 minutes with a 10mm wrench or socket. No special tools needed.
• Common gotcha: If your terminal clamp has a built-in stud instead of a bolt hole, these won’t work. Check your clamp design first.
• Pack size: Four bolts/nuts means two full sets—handy for a spare or for a two-battery setup.

Should You Buy It

If you’re replacing crusty, corroded battery bolts on a John Deere mower with M6 top-post terminals, this is a cheap, effective fix. The stainless steel upgrade beats OEM zinc bolts for longevity. Not for you if your terminal uses a different thread size or a stud-style clamp.