3PK Oregon 92-033 High Lift Blade for Exmark 72" Lazer Z X-Series LZX921GKA726C1

What It Is

This is a set of three Oregon 92-033 high-lift mower blades designed for the Exmark 72" Lazer Z X-Series (model LZX921GKA726C1). High-lift blades create stronger airflow to lift grass before cutting, making them ideal for bagging or side-discharge in tall or damp conditions.

Fitment & Compatibility

• Deck size: 72 inches. You need exactly three blades for this deck.
• Model check: Fits Exmark Lazer Z X-Series LZX921GKA726C1. Confirm your deck model—Exmark uses different blades for other series like Quest or Turf Tracer.
• OEM vs aftermarket: Oregon is a reputable aftermarket brand. These replace OEM Exmark blades (part # 103-9332 or 103-9333). Verify your OEM part number on the blade or deck manual.
• Measurements: Blade length is 24.5 inches, center hole diameter 1 inch, with a 0.25-inch thick body. Measure your current blades to confirm.
• Not for: Other 72" decks (e.g., Toro, John Deere) unless cross-referenced—mounting holes and center hole size vary.

Key Things to Know

• Quality: Oregon blades are heat-treated and hardened, comparable to OEM Exmark. The high-lift design wears faster than standard blades due to increased airflow.
• Installation: Straightforward with a socket wrench. Torque bolts to 70-90 ft-lbs. Use a blade balancer after install—Oregon blades are usually balanced, but check anyway.
• Gotcha: High-lift blades require more engine power. If your mower bogs in thick grass, you may need to slow ground speed or switch to a medium-lift blade.
• Performance: Excellent for bagging—less clumping and fewer clogs. Not ideal for mulching (leaves uncut clippings behind).

Should You Buy It

Buy these if you primarily bag or side-discharge with your Exmark 72" Lazer Z X-Series and want strong lift without paying OEM markup. Skip if you mulch often—look for a gator or mulching blade instead. At $51.99, this is a solid value for a three-pack from a trusted aftermarket brand.