Cables & Controls

351311 Mower Shift Cable Fit for DR Power All Terrain Field and Brush Mower AT4, for Many Field and Brush mowers Replace AT4 35131

4.1/5 (20 reviews)
$15.99
351311 Mower Shift Cable Fit for DR Power All Terrain Field and Brush Mower AT4, for Many Field and Brush mowers Replace AT4 35131
As an Amazon Associate, Mowers.Cloud earns from qualifying purchases.

Check current price, fitment notes, and availability on Amazon:

🛒 See Price on Amazon

What It Is

This is a replacement shift cable (part #351311) designed for DR Power All Terrain Field and Brush Mowers, specifically the AT4 model. It controls the transmission engagement and disengagement, allowing you to shift between forward, neutral, and reverse.

Fitment & Compatibility

  • Exact fit for: DR Power AT4 Field and Brush mowers (model years vary; check your serial number).
  • OEM cross-reference: Replaces OEM part #35131 (note: the listing uses “351311” – verify your old cable’s stamped number).
  • What to measure: Cable length should be approximately 36–38 inches from end to end. If your original is shorter/longer, this won’t work.
  • Deck size: Compatible with all AT4 deck sizes (usually 26” or 30”), as the cable is chassis-side, not deck-specific.
  • Aftermarket note: This is a non-OEM replacement. Quality is generally acceptable for the price, but fitment may require minor bracket or clip adjustments on older machines.

Key Things to Know

  • Installation difficulty: Moderate. You’ll need basic hand tools (wrenches, pliers) and about 30–60 minutes. Access to the cable routing under the mower deck can be tight.
  • Common gotcha: The cable ends are plastic. They can break if overtightened or if the pivot points are rusted. Lubricate all linkage points before installing.
  • Cable routing: Follow the original path exactly. Kinking or sharp bends will cause binding or premature failure.
  • Adjustment: After installation, you may need to fine-tune the cable tension at the transmission lever to ensure full engagement in all gears.

Should You Buy It

If you need a budget-friendly replacement for a DR AT4 shift cable and are comfortable with a moderate DIY install, this is a solid pick. It’s not OEM quality, but for $16, it’s a practical fix for a mower that’s otherwise in good shape. Avoid if you want a plug-and-play, zero-fuss OEM part or if your cable routing is heavily corroded.

Related Parts & Accessories

← More Cables & Controls