33 Inch Deck Mower Blades Fit for Snapper RE210 RE130 REX Series Lawn Mower Replaces OEM 1-6982 1-9523 7019523 7019523BMA 7019523BZ 7019523BZYP 7019523YP (High Lift)

What It Is

These are high-lift replacement mower blades designed for Snapper RE210, RE130, and REX series lawn tractors with a 33-inch cutting deck. The high-lift design increases airflow under the deck for better grass clipping discharge and bagging performance, making them ideal for mowing thick or damp grass.

Fitment & Compatibility

Before buying, verify these three things:

1. Deck size – Your mower must have a 33-inch cutting deck. Measure deck width if unsure.
2. Model series – Confirmed fit for Snapper RE210, RE130, REX, plus many RER, REX, and RPE models. Cross-check your mower’s model number against the OEM part numbers listed.
3. OEM replacements – These replace Snapper OEM parts 1-6982, 1-9523, 7019523, 7019523BMA, 7019523BZ, 7019523BZYP, and 7019523YP. If your current blade has one of these numbers stamped on it, these will fit.
4. Measurements – Blade length is 33 inches overall (not the cutting swath). Center hole diameter is typically 1 inch, but confirm your spindle’s hole size before ordering.

Key Things to Know

• High-lift design – Provides stronger vacuum for bagging but increases engine load and wear on the belt. Not ideal for dry, dusty conditions where you want to leave clippings.
• Installation difficulty – Easy: remove the old blade (use a block of wood to prevent spindle rotation), then install the new blade with the lift wings pointing upward toward the deck. Torque to 40-50 ft-lbs.
• Balance – Aftermarket blades may need balancing. Check with a blade balancer before mounting to avoid vibration and spindle damage.
• Common gotcha – The 33-inch measurement is the blade’s total length, not the cut width. Measure your old blade end to end to confirm.

Should You Buy It

If you own a Snapper 33-inch deck mower and need reliable high-lift blades for bagging or wet grass, these are a solid, well-rated match. They’re a direct fit for the listed OEM numbers, install easily, and the price is fair for a set of three blades. Just confirm your deck size and model series first, and plan to balance them before use.