(3) Replacement Mower Blades to Fits Ferris Snapper ICD 61" Mower Deck Replaces 5101755S

What It Is

This is a set of three replacement blades for a 61-inch Ferris or Snapper ICD (Independent Cutting Deck) mower, designed to fit models that use OEM part number 5101755S. They are for commercial or residential zero-turn mowers with a 61-inch fabricated deck.

Fitment & Compatibility

Before buying, confirm your mower deck is exactly 61 inches (measured blade tip to tip). These blades fit Ferris IS2000Z, IS3000Z, and Snapper Pro S150X, S200X, and S300X series with ICD decks. Check your current blade’s length (should be ~20.5 inches), width (~2.5 inches), and center hole diameter (~0.625 inches or 5/8"). Verify the part number on your old blade matches 5101755S or 5101755SM. Aftermarket sets like this are not OEM, so measure your blade’s thickness (typically 0.203 inches) and ensure the sail height matches your deck’s airflow design.

Key Things to Know

• Quality: These are typically hardened steel with a coated finish to resist rust. Reviews indicate they hold an edge well for residential use but may dull faster than OEM in heavy commercial cutting.
• Installation: Straightforward if you have a torque wrench—tighten blade bolts to 70-80 ft-lbs. Use thread locker on bolts to prevent loosening. Lift the deck safely with jack stands; never rely on the mower’s hydraulics alone.
• Common Gotchas: The center hole and offset (if any) must match your spindle. These blades are likely non-rotational (fixed orientation), so check the cutting edge direction. Also, verify the blade’s air lift (sail) matches your deck—ICD decks require specific lift for proper grass discharge.
• Set Includes: Three blades, but no hardware (bolts/washers). Reuse or replace hardware separately if worn.

Should You Buy It

If you own a Ferris or Snapper ICD 61-inch deck and want a reliable, cost-effective alternative to OEM blades for regular residential or light commercial mowing, this set offers excellent value. For heavy daily commercial use, stick with OEM for longer life and consistent cut quality.