3 Pack 601124 Low Lift Mower Blades with Hardware Replaces 797696 797704 601013 602416 797712 for Hustler 54 inch Mower Blades Hustler Raptor sd 54 Blades Hustler Fastrak 54 inch Mower Blades

What It Is

This is a 3-pack of low-lift 54-inch mower blades (part #601124) designed for Hustler zero-turn mowers, specifically the Raptor SD and Fastrak series with 54-inch decks. Low-lift blades are ideal for dry, sandy conditions or light grass—they produce less lift and are less likely to scalp or stir up dust compared to high-lift blades.

Fitment & Compatibility

Before buying, confirm your deck is exactly 54 inches (not 52 or 60). These blades replace OEM part numbers 797696, 797704, 601013, 602416, and 797712. They fit Hustler Raptor SD 54, Fastrak 54, and select other Hustler models with a 54-inch deck. Measure your existing blade length (should be ~20.5 inches), center hole diameter (commonly 5/8-inch or 7/16-inch), and check the blade offset (low-lift are usually flat or slightly curved). Verify that your spindle assembly accepts the included hardware (typically a 5/8-inch bolt and lock washer). If you have a different brand (e.g., Scag, Toro), these will not fit.

Key Things to Know

• Quality vs OEM: Aftermarket blades are generally acceptable for residential use, but may not match OEM steel hardness or balance. Expect slightly shorter lifespan.
• Installation: Simple—jack up mower, remove old blades with a socket wrench (torque to ~70-90 ft-lbs), and install new ones with included hardware. Use thread locker if not pre-applied.
• Low-lift limitation: Not ideal for thick, wet, or tall grass—can leave uncut strips or clog the deck. Stick to dry, short grass for best results.
• Balance check: After installing, spin blades by hand to ensure they don’t wobble. Unbalanced blades cause vibration and spindle wear. You can balance them with a simple blade balancer tool.

Should You Buy It

If you own a Hustler 54-inch zero-turn (Raptor SD or Fastrak) and primarily mow dry, sandy lawns or want to reduce dust and scalping, this 3-pack at ~$35 is a solid budget-friendly choice. However, if you cut thick, wet grass or need OEM durability for commercial use, invest in genuine Hustler high-lift blades instead.