2pcs Universal Snow Plow Blade Flap 72"x 6"x 1/4" Rubber Snow Deflector Compatible with Kolpin & Polaris for ATVs,UTVs,Side-by-Sides and 4-Wheelers

What It Is

This is a pair of 72-inch-long, 6-inch-tall, 1/4-inch-thick rubber flaps designed to attach to the bottom edge of a snow plow blade. They act as a flexible wear surface that conforms to uneven ground, protecting the blade and preventing damage to paved surfaces. Compatible with ATVs, UTVs, side-by-sides, and 4-wheelers using Kolpin or Polaris plow systems (and many universal mounts).

Fitment & Compatibility

Before buying, check three things:

• Blade width: The 72-inch length works on blades up to 72 inches wide. If your blade is narrower, you’ll need to trim the flap to size.
• Mounting system: These are universal, but they’re designed for plow blades that use a straight, flat mounting edge with bolt holes. Kolpin and Polaris models are confirmed fits; for other brands, measure your blade’s mounting hole spacing (typically 6–8 inches apart) and ensure the flap’s pre-drilled slots align (or you can drill your own).
• Thickness: 1/4 inch is standard for most ATV/UTV plows. If your blade has a tight channel or uses a different thickness (e.g., 3/8 inch), this may not fit without modification.

Key Things to Know

• Material quality: The rubber is reportedly stiff enough for snow but flexible enough to avoid gouging asphalt. Some users note it may become brittle in extreme cold (below -20°F).
• Installation difficulty: Easy – typically bolts onto existing blade holes. You may need to drill new holes if your blade’s pattern doesn’t match the pre-drilled slots (common with non-Kolpin/Polaris mounts).
• Common gotcha: The 6-inch height works for most plows, but if your blade has a tall moldboard or a curved lip, the flap may curl under or not reach the ground. Measure your blade’s vertical clearance first.
• Pair vs. single: This is a 2-pack, so you get a spare or can double-layer for heavier snow. If you only need one, consider a single-flap option.

Should You Buy It

If you own a standard ATV/UTV snow plow (especially Kolpin or Polaris) and need a durable, affordable rubber flap that protects your blade and surfaces, this is a solid choice. It’s best for occasional to moderate snow clearing on paved driveways or gravel. Skip it if you have a very narrow blade (under 60 inches) or need a heavy-duty, cold-weather-specific rubber for commercial use.